How to Choose Your Enterprise Connectivity: Satellite Internet, Broadband or Fiber

Most multi-site companies never set out to design their network. Instead, the network grew one location at a time. One region signed with a cable provider, another went with a local fiber carrier. A few stores got a cellular router after experiencing a bad outage, and eventually someone pushes for standardizing the tech stack.

That standard is often where trouble starts. When hundreds of locations share one connectivity approach, smaller sites using a few gigabytes a day end up paying for capacity they’ll never use. High-traffic sites that can’t afford downtime, like a fuel station taking cards at the pump or a grocery store before a holiday, often have a backup connection that shares a cable path or a cell tower with the primary. When one goes down, both do.

A better way to plan is site by site, matching each location to the connection, or combination of connections, that fits how it operates.

The Main Connectivity Options

Dedicated fiber (direct internet access)

Direct internet access, usually delivered over fiber, gives a site its own dedicated circuit. No other customers share it, and upload speeds match download speeds, which matters for anything that sends a lot of data out. Speeds can reach a gigabit and beyond.

This is often the most expensive option. Large retailers typically pay between $500 and $1,000 per site per month, and getting a new circuit installed can take between 60 to 180 days.

Broadband: cable and cellular

Broadband connectivity is shared. Your sites are on the same network as other customers in the area, so when everyone is online at once, performance can dip. The tradeoff is price. Business broadband commonly runs around $150 per site per month, a fraction of what fiber costs.

Cable is the wired version, delivered over the same lines as cable TV. It’s reliable for everyday use, but a new line can take as long to install as fiber.

Cellular is the wireless version, using a 4G or 5G router instead of a physical line. It can be up and running in a day, which makes it popular as a quick fix or a backup. The catch is that plans are often data-capped, and performance depends on local coverage and how busy the nearby tower is.

Satellite

Satellite internet used to mean slow speeds and long lag. Now, low-earth-orbit networks like Starlink have changed that. Starlink reports peak speeds up to 470 Mbps with latency as low as 20 milliseconds. It also reports more than 99.9% average uptime.

Technically, Starlink is a shared service too, though it isn’t shared as heavily as typical cable broadband. Its biggest advantage is speed to deploy: a site can be online in hours or days, compared with 60 to 180 days for a new fiber or cable install. Because the connection comes from orbit, it doesn’t rely on the same physical lines as your other connections. When a construction crew cuts a cable down the street, a satellite link keeps working.

Connectivity option breakdown

Dedicated FiberBroadband (cable, cellular)Satellite (Starlink)
Shared or dedicatedDedicatedSharedShared, less heavily
Typical cost per site$500 to $1,000/monthAbout $150/monthDepends on selected data plan
Time to deploy60 to 180 daysCable: 60 to 180 days. Cellular: a few days.Hours to days
Setup and supportCarrier installs the line. Your team manages itUsually carrier-installed, with some self-install optionsSimple to self-install at one site. Across many sites, a managed partner like WEI handles the rollout and runs the network day to day, with 24/7 support and spare hardware on hand
Best fitHigh-traffic sitesEveryday sites with moderate needsAnywhere you operate. New, remote, low-usage and backup sites, plus everyday locations that need enterprise-grade primary or backup internet

What to consider for each site

How much data the site uses

Start with what each site uses each month. A store running point of sale and a few security cameras may use only a few gigabytes a day, so a dedicated fiber circuit could be hard to justify. Satellite tends to make the most financial sense for sites using roughly 1 to 25 GB of data per day.

The data plan matters as much as the connection. One company WEI Connect works with was buying about 250% more data than its sites used, because per-site overage charges were steep enough that overbuying felt safer. Moving all of its locations onto one pooled plan with a single flat rate fixed the problem.

What it costs when the site goes offline

Some sites can lose internet for an hour without much consequence. A pharmacy or a clinic can’t. If you’re not sure where a site falls, estimate what an hour of downtime costs there. If the number is high, a backup connection is worth the money.

The problem is that many backups don’t provide full protection. A second cable line from a different carrier usually enters the building through the same conduit as the first one, so a single cut can take out both. A cellular backup depends on the nearest tower, and the same storm that knocks out your cable line can take the tower down with it.

A backup needs to reach your site in a different way than the primary does. Satellite does, which is why it works well in that role.

How fast you need it running

If you’re opening a new location next month, an install window of 60 to 180 days won’t work. Pop-up shops, seasonal locations, construction trailers and new stores all need connectivity faster than traditional carriers can deliver. Satellite can get those sites running right away and stay in place as a backup once a permanent line arrives.

Why large retailers are rethinking fiber

For years, many of the biggest multi-site retailers put fiber in every store. It’s reliable, but at $500 to $1,000 per site per month; the bill gets large fast when you’re running hundreds or thousands of locations.

A growing number are now moving sites off fiber and onto broadband for both their primary and backup connections. Most stores don’t need dedicated gigabit speeds, and two cheaper connections that reach the building in different ways can hold up better than one expensive line.

The blended model: no more primary and backup

Traditionally, one connection did all the work while the backup sat idle, waiting for something to break. SD-WAN, the software layer that manages a site’s connections, changes that.

With broadband and Starlink both connected at a site, SD-WAN balances traffic across the two based on what each application needs. Real-time traffic like a Teams call can run over Starlink, while other traffic uses broadband. If either connection fails, everything shifts to the one that’s still up.

At that point, asking what the primary link is stops making sense. Both connections work all the time, and the site gets the best throughput and latency available from each, instead of paying for a backup that only earns its keep a few days a year.

The failover half of this is what saved a national retail pharmacy chain during hurricane season. C-stores, quick-service restaurants and grocery stores in storm-prone regions face the same risk. Stores that relied on fiber or cable with traditional backup were going dark when both lines failed. After adding Starlink as an independent, always-on connection with automated failover at its highest-risk stores, those locations had zero outages for the entire season.

What this looks like by industry

Convenience and fuel: A c-store that loses its connection can’t authorize cards at the pump. Many of these stores run 24 hours a day at highway exits and in small towns, where wired options are limited. Satellite gives them a second path that doesn’t depend on the local cable plant, and it can bring a new store or standalone fuel site online before a carrier would schedule the install.

Quick-service restaurants: Digital ordering, delivery apps, drive-thru systems and kitchen displays all depend on a live connection. When a restaurant drops offline at lunch, mobile orders stop coming in. Broadband paired with satellite through SD-WAN keeps orders flowing if one line fails, and a standard setup across locations is easier to roll out to franchise operators.

Automotive, hardware and specialty retail: Parts, paint and hardware stores check inventory across the network all day, and many deliver to repair shops and contractors on tight timelines. A store that can’t look up stock or take an order loses that sale to whoever can. Most of these are small-box sites with modest data needs, which puts them in the range where satellite makes the most financial sense.

Grocery and big-box retail: Large stores usually justify fiber, but they also lose the most revenue per hour offline, so the backup needs to reach the building a different way. For grocers with in-store pharmacies, it also keeps prescriptions and patient records available during an outage. Satellite can also cover the sites around the main store: fuel centers, curbside pickup, garden centers and seasonal lots.

Rural and discount retail: Dollar stores and farm and ranch retailers often operate in towns where one wired provider serves the address, or none does. Satellite reaches those stores on the same network as metro locations, with the same hardware and support.

Where WEI Connect fits

For many multi-site companies, the answer is a mix: fiber or broadband where they make sense, and satellite where speed to deploy or resilience matters most.

WEI Connect makes Starlink enterprise-ready. We add Starlink to the connectivity you already have, as the primary connection at some sites and a backup at others. It plugs into the SD-WAN and security tools you already run, so your sites use both connections instead of leaving one idle.

On top of that, you get pooled data plans across all your sites, real-time visibility into every connection, spare hardware on hand for fast replacement, and 24/7 support from one accountable partner.

Ready to see where Starlink fits in your network? Talk to a WEI Connect expert.

Frequently Asked Questions

What’s the difference between broadband and dedicated internet access?

Dedicated internet access gives a site its own circuit with matching upload and download speeds, typically at $500 to $1,000 per month. Broadband is shared with other customers, has much slower uploads, and typically costs around $150 per month.

What is enterprise satellite internet?

Enterprise satellite internet is satellite connectivity delivered to business standards: low-earth-orbit service like Starlink, paired with the data plans, monitoring, integration and support a company running many sites needs. A consumer satellite plan covers one location. Enterprise satellite internet covers your whole footprint and is managed as one network.

Both run on the same satellite network. Starlink for enterprise adds priority data plans and a service level agreement, and it’s typically rolled out across many sites at once. It can serve as a site’s primary connection or as a backup. At that scale, management becomes the real work: standardizing hardware across locations and keeping every site visible from one place.

Which types of retail chains use enterprise satellite internet?

Convenience and fuel chains, quick-service restaurants, discount and rural retailers, automotive parts stores, hardware and specialty retailers, and grocery and home improvement chains all use satellite, usually alongside broadband or fiber. Small-format stores that use roughly 1 to 25 GB of data a day can run satellite as a primary connection. Larger stores add it as a backup that reaches the building independently of their wired lines. Chains with sites in rural areas or along highways use it where wired service is limited or slow to install. Fast-growing chains use it to open new stores in days instead of waiting months for a carrier.

A managed Starlink service handles everything around the connection: preconfigured kits and professional installation, pooled data plans with one flat rate, a dashboard with real-time usage and performance data, 24/7 support, and stocked spare hardware for fast replacement. WEI Connect is WEI’s managed Starlink offering for enterprise customers.

Starlink provides the hardware and network. For a multi-site rollout, a managed partner like WEI handles the rest: site readiness planning, installation through certified field technicians, integration with your SD-WAN and security stack, and ongoing monitoring and support once the sites are live.

How long does it take to bring a site online with satellite?

Bringing a site online with satellite takes hours to days, compared with the 60 to 180 days a new fiber or cable install often takes.

LinkedInFacebookEmail